Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

Rick,....I purchased a 790 2 years ago...with front end loader..wheel drive, mid mount mower... just thought I would add my 2 cents worth....beautiful machine....built like a rock....however after owning this machine...I would ..as you are leaning towards...probably look at the 990.......one of my regrets is that the 790 only comes with a 60 inch mid mount mower.....a 72 inch would have been much better and the machine certainly has enough power to handle it....and the last time I checked....Deere didn't offer a mid mount mower for the 990...and now I'm even wondering if they have a mid PTO option on that machine???? Don't know how cold it gets where you are.... but I am in Manitoba, Canada.......and we use the front end loader and 6 foot box scraper for snow removal...works like a charm....either way 790 or 990 you won't be disappointed......and as far as accessing the machine....never been a problem........ best of luck with your purchase.... Glen

790 or 990
John Deere Tractors
Replies 36 Post by Glen Schattner

As I mentioned in my previous posting from last October..."my John Deere Dealer" replaced everything for me..all at no charge....as with your case..at firstmy service person had no clue what it was all about...some digging and research later...along with some digital photos that my dealer took of all damaged parts....sent them to area rep....and short while later...repairs were effected...as I recall the tab was in the area of $350 to $400 when all was said and done....don't give up...if you still are having problems ...next time I see th boys at John Deere I will ask them if there is some factory bulletin that was published....
good luck.....Glen

JD 790 Battery-Warranty-Rusting
John Deere Tractors
Replies 6 Post by Glen Schattner

Doug,
I have the same tractor and had the same problem.....the lads on the assembly floor must be using air wrenches to tighten those wing nuts.

The solution is to ..a) either buy another one,,as you did...but I had a heck of time getting it off the second time as well...for whatever reason....or

b) replace plastic wing nut with steel one or use nylox bolt and you can use socket set to remove it next time.....

Problem is partly due to engine vibration,,,you have to crank it on a little bit or you will loose same in short while.

JD 790 Air Filter
John Deere Tractors
Replies 12 Post by Glen Schattner

I have a 790 with 4 wd and the loader.......it's great for pushing snow, moving loose soil and gravel etc....and I emphasize " LOOSE"....
if it is compacted in any way.....it's a no go.....

it's a light duty tractor and a very light duty loader.....as soon as your bucket hits something too hard or you try and dig or lift compacted material, you can see the loader arms starting to flex.!!! not good....

so in answer to your question about tree removal.......my answer would be a definite no to that...save your money and your machine...hire the dozer guy.......

that's probably not what you wanted to hear,,,but the truth from an owner/operator......

Glen

How Much Can a 790 w loader do
John Deere Tractors
Replies 45 Post by Glen Schattner

I have noticed a large amount of corrosion on my battery cables..on my 790.....I was looking back in the previous posts about this very same problem.......but I don't think there was ever an answer.....is this a warranty problem...or are we stuck with this ourselves.....??????And has anyone ever determined just what the problem is..??? is it a cable problem or battery problem?????<br>Anyone???

JD 790 Battery Corrosion
John Deere Tractors
Replies 6 Post by Glen Schattner

I have recently purchased a 6 foot Farm King box scraper for my 790.<br>On the rear 3 pt arms...I have lateral float option, by moving 2 pins....<br>When using the box scraper....do I want lateral float in place or not.????

JD 790 Box Scraper
Operating and Attachments
Replies 6 Post by Glen Schattner

Starting this spring, I will be trailering my 790 around the countryside on the back of a tandem axle equipment trailer.....where are the best or approved points for tieing down the 790 to the trailer..are the weg type ratchet slings OK for this.??<br>when the young fellow that brought my tractor to me from the dealership....all he had was one of those ractchet type slings, from one side of trailer, over top of gear shift tunnel and down other side??<br>I always thought the axles of the machine you were transporting..had to be secured?? guess I can always check with the highways inspection station..any thoughts on this???Glen

JD 790 Trailering
John Deere Tractors
Replies 5 Post by Glen Schattner

I've had my 790 for about 6 weeks now......can't say enough good things about the machine....<br>a few questions have come up though, ....perhaps someone more familar with the 790 can answer.......<br>with regards to the rear 3 pt hitch arms......from reading the operators manuaI.I see that the arms can be set to lateral float by moving 2 pins, out of their slots.?? OK no problem with that.....but what would be some examples of where I would want that.?????<br>rototilling.....using rear blade or box scraper....<br>anyone.?????thanks in advance.<br>Glen

JD 790 Lateral Float
John Deere Tractors
Replies 3 Post by Glen Schattner

Rob,

Yes...please keep us posted...Maybe there will be some nation wide battery replacement program. Chance to get a better battery,

How long have you had your 790/ original battery?

JD790 Battery Woes - Cont
Parts and Repair
Replies 11 Post by Glen Schattner

With regard to your mower question.......I faced same decision not too long ago........ended up going with the JD 60 inch mid mount mower......
remember one thing.....if you can't get the tractor and/or rear mount mower into where you want to cut grass.....the grass don't get cut...just about that simple....yes...JD mowers cost a little more...but take a close look at the quality and you will see why....and especially if you want to go with a mid mount......try and spring for the Deere model.....everything has to be aligned just so....to make it fit......with rear mount jobbies...you can slap anything back there.....
and as far as installing and removing mower........well...probably 90 percent of ur jobs you can just leave the mower on and do whatever it is you want to do.......but time wise...once u have removed it a couple of times....you shouldn't need more than...10 minutes..max...to remove or intall same....at least that what it takes me.....and you don't need any
tools...
in the raised position with transport links...it sits quite high underneath the bellu of the tractor......
do urself a favour and at least check out the JD model and compare....best of luck in ur decison....
Glen

JD 790 Mower Question
John Deere Tractors
Replies 4 Post by Glen Schattner

Anyone know why John Deere didn't paint the bucket that comes with the 70 loader...in John Deere green..instead of the flat black that they used.....enquiring minds want to know

Jd 790 Paint Colour
John Deere Tractors
Replies 3 Post by Glen Schattner

Well...after purchasing my 790 2 weeks ago....I have to say I am very happy with it so far.....ordered with 4WD..70 loader, PTO front and back...JD 60 inch mid mount mower... I have installed 2 extra work lights in the pre drilled holes on the rear fenders..lights things up real good back there now...oh yes also came with turf tires....which I am absolutely amazed on how this machine just marches thru 2 feet of snow......unreal....no rear ballast as yet either....put it into 4 WD..loader down...1 st gear low....had to use the diff. lock a few times..but this leads me to my question of how much extra traction I will obtain by throwing 3 or 400 pounds back there??? and one more qustion for anyone out there.......why is the bucket that comes with the 70 loader...painted black and not John Deere green..???? enquiring minds want to know.????hmm

Paint Colour
John Deere Tractors
Replies 3 Post by Glen Schattner

Thanks for all the good advice......I went out to my tractor...and lo and behold did find 2 female type connectors...under the seat...one of each side...just waiting to be used....used a tester in the connector and found that power is supplied when headlights are turned on in field position...in the next week or so I will be installing 2..rear work lights in the fenders.....
...and as far as blades go...I am looking at a 6 foot blade..from Farm King...weighs about 275 lbs..???? can anyone comment on this name brand?? is Farm King considered the Wal Mart of implements.??? or should I be looking for another brand....can buy one from Deere & Co...but...for the price they want..I could buy 4 of the Farm King brand??? any thoughts on which brand to buy...and what should a good rear blade weigh for my tractor?????

JD 790 Rear Blade
John Deere Tractors
Replies 7 Post by Glen Schattner

Have recently purchased a JD 790..if I were to put a rear 3 pt hitch type snow blower on same...what is the widest width I can use without overloading the tractor pto?? 60 inch or 72 inch???

Rear mount snowblower
John Deere Tractors
Replies 6 Post by Glen Schattner

I have recently purchased a 790 and am looking for a rear blade or box scraper for same.....can I use a 6' blade or is 5' maximum for this tractor???

Rear Blade or Box Scraper
Operating and Attachments
Replies 2 Post by Glen Schattner

Kevin.......if you have read my last post.....you can email me directly at
gschatt@mb.sympatico.ca I have some more questions for you...thx

JD 790 Pricing
John Deere Tractors
Replies 15 Post by Glen Schattner

Well I'm still trying to compare the 790 and 4100........<br>For those that have either of the above machines or have driven same.....can anyone tell me .......how much less manoueverability the 790 has as compared to the 4100 ??????<br>I was checking the specs......and from what I can see...the 790 is about 5 inches wider and 9 inches longer than the 4100.......and I think wheelbase was maybe 3 inches longer on 790 as well......I can appreciate that I won't be able to turn as sharp or as close..as say with the 4100.....but I guess I need to know how much less, and is it an issue to really be all that concerned about. Most of my real close trimming still has to be done with a weed eater anyway.....mind you ,..turning around in the garden could be real challenge as well....I think those wheel brakes will be getting a good work out....thx<br>glen

JD 790 vs JD 4100
John Deere Tractors
Replies 2 Post by Glen Schattner

Walt.....if you would like to stay with JD.......have you also considered the JD 790...has 30 hp or 25 pto hp. with 4 WD, you also get continuous live pto...bout the same price as 4100.....right now I am wrestling with this very decision....the 16 pto hp scares me a little on the 4100......but..I want to make use of a 5' tiller..so....so long as I don't lose too much in manoeuvrablity cutting around obstacles.....

B7500 vs JD4100
Kubota Tractors
Replies 8 Post by Glen Schattner

For those out there who live in the snow belt and have used their 4100 in the cold winter...have you experienced any problems with slow hydraulics..??? do you have to thin down the fluid or change over to lighter wieght......I live in Manitoba, Canada...so are winters are fairly substantial...lots of -20 to -25 stuff.....<br>anyone use chains with their turf tires,,is it neccessary...<br>glen

JD 4100 in winter
John Deere Tractors
Replies 5 Post by Glen Schattner

I think from an operational viewpoint...I would probably side with the 4100 HST...smaller in size/weight..and I think would be easier to get around all the trees and shrubs on the lawn......and as for tilling...this would be for an established garden..nice well worked soil....not for sod busting....so I am hoping I can get by with the 60 inch tiller...I realize I am kinda going about it backwards,,,,buying tractor to match implements...but..when someone says...here..take this 60 inch JD tiller for free !! well...what can I say..I guess if I don't try to bust sod..or till hard packed clay...hopefully ..it will work......
on another topic....does the fact that the 4100 has indirect injection as opposed to direct injection on the 790.....mean anything significant?????
harder starting or not as good fuel consumption...don't know much at all about diesel motors.....from these small tractors....

glen

JD 4100 vs JD 790
John Deere Tractors
Replies 13 Post by Glen Schattner